Kimber Ultra Carry User Manual download pdf (Page 29)

Please follow the simple procedures below for

disassembly of the slide.

1. Visually inspect chamber to make sure

firearm is unloaded.

2. Follow standard disassembly procedures found

in this Owners Manual, with the exception

that special observation should be given that

the grip safety is not to be engaged when

removing the slide.

If the Grip Safety is depressed while attempting to

remove the slide, the push rod for the firing pin

stop will be activated. Activating the Grip Safety

will not allow the slide to be removed, if forced,

damage could occur to the firearm, which w

ill not

be covered under Warranty.

DISASSEMBLY (FIELD STRIPPING)

This product should be cleaned after every use and

when exposed to dirt, sand, etc. When not in use,

clean at least twice per year.

1. With the pistol unloaded and the magazine

removed, retract and lock back the slide.

Locate the exposed small hole in the recoil

spring guide rod. Insert the take down tool in

the hole in the guide rod and carefully

release the slide stop. (See diagram)

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 47 48

No comments

Kimber Ultra Carry User Manual Page 29