Kimber Ultra Carry User Manual download pdf (Page 37)

b. Disconnector on top of frame - Small drop.

c. Barrel Hood - two drops, spread on hood.

d. Barrel Locking lugs inside Slide and on

Barrel - one drop on each lug.

e. Barrel Link- one drop behind link.

f. Slide Stop pin - one drop, spread with finger.

g. Outside of Barrel - Oil. Do not over oil,

spread with fingertip.

h. Cock Hammer - one drop in between the

hammer and frame.

i. Assemble gun. Rack the Slide 5-6 times,

dry fire. Wipe off excess oil from gun.

j. Make sure, if you have stored the gun with

oil in the barrel and chamber, that you run

a dry patch through the barrel to clear it of

the oil before you fire the gun.

3. Reassemble as previously described.

The key is m

oderation. Not enough oil and your

gun may not function properly and lead to undo

wear. Too much oil and you risk attracting damaging

dirt and debris to the bearing surfaces causing

undo wear and potential functioning problems. A

metal parts even Stainless Steel should be lightly

lubricated because

RUST IS NEGLECT!

A cloth impregnated with Silicone is good for this

purpose.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 47 48

No comments

Kimber Ultra Carry User Manual Page 37